NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 15 results (0.10 seconds)
- 6340-00-469-9040 SENSING ELEMENT,FIRE DETECTOR SYSTEMMore Info ...
- ELEMENT LENGTH
- 45.000 FEET NOMINAL
- TERMINATION QUANTITY
- 2
- TERMINATION CONTROLLING AGENCY
- WALTER E KIDDE CO
- TERMINATION TYPE
- CONNECTOR PLUG
- FSC APPLICATION DATA
- ACFT MODEL AH-1J
- 2520-00-999-2303 RETAINERMore Info ...
- 6130-01-440-9144 POWER SUPPLYMore Info ...
- 5340-00-823-4809 POST,ELECTRICAL-MECHANICAL EQUIPMENTMore Info ...
- CROSS-SECTIONAL SHAPE
- HEXAGON
- LENGTH
- 1.015 INCHES NOMINAL
- WIDTH ACROSS FLATS
- 0.500 INCHES NOMINAL
- STYLE DESIGNATOR
- LEFT INTERNAL AND RIGHT INTERNAL THREADS
- 2520-00-679-9629 SHAFT,STEERING BRAKMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- MATERIAL STEEL FORGING 4145,5145 AND 8645 SPEC MIL-S-13048;LENGTH OVER ALL 6.690,FOR FURTHER INFORMATION SEE DRAWING
- TEST DATA DOCUMENT
- 19207-8756551 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
- 5310-01-022-8112 NUT,PLAIN,HEXAGONMore Info ...
- BEARING SURFACE TYPE
- CHAMFERED
- MATERIAL DOCUMENT AND CLASSIFICATION
- QQ-S-736,COND A FED STD 1ST MATERIAL RESPONSE OVERALL OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OVERALL
- MATERIAL
- STEEL COMP 304 OVERALL OR STEEL COMP 303 OVERALL
- NOMINAL THREAD SIZE
- 0.190 INCHES
- NUT STYLE
- HEXAGON
- 5306-00-679-9848 BOLT,SHOULDERMore Info ...
- DISTANCE FROM CENTERLINE TO FLAT
- 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
- FASTENER LENGTH
- 1.750 INCHES NOMINAL
- HARDNESS RATING
- 33.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL
- HEAD HEIGHT
- 0.125 INCHES NOMINAL
- HEAD DIAMETER
- 0.875 INCHES NOMINAL
- 5340-01-246-0690 POST,ELECTRICAL-MECHANICAL EQUIPMENTMore Info ...
- MATERIAL
- STEEL OVERALL
- MATERIAL DOCUMENT AND CLASSIFICATION
- ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
- SURFACE TREATMENT
- PASSIVATE OVERALL
- SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
- QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
- CROSS-SECTIONAL SHAPE
- HEXAGON
- 5315-00-679-9850 PIN,STRAIGHT,HEADLESSMore Info ...
- DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN
- 0.141 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
- CENTER TO CENTER DISTANCE BETWEEN HOLES
- 2.422 INCHES MINIMUM AND 2.453 INCHES MAXIMUM
- FEATURES PROVIDED
- CASEHARDENED
- FIRST END STYLE
- CHAMFERED
- FIRST END TAPER ANGLE
- 42.0 DEGREES MINIMUM AND 48.0 DEGREES MAXIMUM
- 3040-00-999-2311 LEVER,REMOTE CONTROLMore Info ...
- MATERIAL
- STEEL
- MATERIAL DOCUMENT AND CLASSIFICATION
- QQ-S-681, CLASS 90-60 FED SPEC SINGLE MATERIAL RESPONSE
- STYLE DESIGNATOR
- ONE HOLE TONGUE LINK END, SECURING HOLE SHAFT END
- OVERALL WIDTH
- 2.031 INCHES NOMINAL
- CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES
- 6.031 INCHES NOMINAL
