NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 11 results (0.16 seconds)
- 4910-00-268-9772 GAGE,TIRE PRESSURE,SELF-CONTAINEDMore Info ...
- CALIBRATED SURFACE LOCATION AND QUANTITY
- 4 STEM SIDE
- CALIBRATION RANGE
- +10.000/+45.000 POUNDS
- CHUCK TYPE
- SINGLE FOOT
- EXTENSION
- NOT INCLUDED
- FOOT CHUCK MOUNTING ANGLE IN DEG
- 30.0
- 4910-00-541-9740 GAGE,TIRE PRESSURE,SELF-CONTAINEDMore Info ...
- CALIBRATED SURFACE LOCATION AND QUANTITY
- 4 STEM SIDE
- CALIBRATION RANGE
- +10.000/+50.000 POUNDS
- CHUCK TYPE
- SINGLE FOOT
- EXTENSION
- NOT INCLUDED
- FOOT CHUCK MOUNTING ANGLE IN DEG
- 30.0
- 4910-00-522-3778 INFLATOR-GAGE,PNEUMATIC TIREMore Info ...
- CALIBRATION RANGE
- +10.000/+120.000 POUNDS
- CHUCK VALVE HOLDING CLIP
- NOT INCLUDED
- CHUCK TYPE
- DUAL FOOT
- DEFLATING COCK
- NOT INCLUDED
- DEFLATING POSITION
- INCLUDED
- 4910-00-895-6175 VALVE CARTRIDGE,INFLATOR GAGEMore Info ...
- END ITEM IDENTIFICATION
- 4910005223778
- DEPARTURE FROM CITED DESIGNATOR
- REPLACEABLE VALVE CARTRIDGE ONLY
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- REPLACEMENT CARTRIDGE,AIR CONTROL ASSY,PNEUMATIC TIRE INTERNAL INDICATING INFLATOR GAGE,DUAL CHUCK FT ST
- NONDEFINITIVE SPEC/STD DATA
- 3 TYPE AND 2 STYLE
- 4910-00-204-2547 INFLATOR-GAGE,PNEUMATIC TIREMore Info ...
- CALIBRATION RANGE
- +10.000/+120.000 POUNDS
- CHUCK TYPE
- DUAL FOOT
- CHUCK VALVE HOLDING CLIP
- NOT INCLUDED
- DEFLATING COCK
- NOT INCLUDED
- DEFLATING POSITION
- INCLUDED
- 4910-00-319-7506 INFLATOR-GAGE,PNEUMATIC TIREMore Info ...
- CALIBRATION RANGE
- +10.000/+120.000 POUNDS
- CHUCK VALVE HOLDING CLIP
- NOT INCLUDED
- CHUCK TYPE
- SINGLE FOOT
- DEFLATING COCK
- NOT INCLUDED
- DEFLATING POSITION
- NOT INCLUDED
- 4910-00-204-3170 GAGE,TIRE PRESSURE,SELF-CONTAINEDMore Info ...
- 7420-21-904-3047 CALCULATING MACHINEMore Info ...
- 5930-01-303-3361 SWITCH,SENSITIVEMore Info ...
- 5306-01-067-5162 BOLT,MACHINEMore Info ...
- FASTENER LENGTH
- 1.778 INCHES MINIMUM AND 1.808 INCHES MAXIMUM
- FEATURES PROVIDED
- FINISHED HEAD
- GRIP LENGTH
- 1.297 INCHES MINIMUM AND 1.327 INCHES MAXIMUM
- HEAD HEIGHT
- 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
- HEAD STYLE
- HEXAGON
