NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 20976 results (0.15 seconds)
- 5331-01-410-8468 O-RINGMore Info ...
- CENTER HOLE DIAMETER
- 1.597 INCHES MINIMUM AND 1.627 INCHES MAXIMUM
- CROSS-SECTIONAL HEIGHT
- 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM
- HARDNESS RATING
- 88.0 SHORE DUROMETER A MINIMUM
- MATERIAL DOCUMENT AND CLASSIFICATION
- MIL-P-5510 MIL SPEC SINGLE MATERIAL RESPONSE
- MATERIAL
- RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
- 5331-01-035-4317 O-RINGMore Info ...
- ELONGATION PERCENTAGE
- 80 MAXIMUM
- CENTER HOLE DIAMETER
- 3.219 INCHES MINIMUM AND 3.249 INCHES MAXIMUM
- CROSS-SECTIONAL HEIGHT
- 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
- HARDNESS RATING
- 90.0 SHORE DUROMETER A NOMINAL
- MATERIAL
- RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
- 5331-00-021-2891 O-RINGMore Info ...
- ELONGATION PERCENTAGE
- 80 MAXIMUM
- CENTER HOLE DIAMETER
- 1.042 INCHES MINIMUM AND 1.054 INCHES MAXIMUM
- CROSS-SECTIONAL HEIGHT
- 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
- HARDNESS RATING
- 90.0 SHORE DUROMETER A NOMINAL
- MATERIAL
- RUBBER SYNTHETIC
- 5331-00-892-2289 O-RINGMore Info ...
- ELONGATION PERCENTAGE
- 80 MAXIMUM
- CENTER HOLE DIAMETER
- 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
- CROSS-SECTIONAL HEIGHT
- 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM
- HARDNESS RATING
- 90.0 SHORE DUROMETER A NOMINAL
- MATERIAL
- RUBBER SYNTHETIC
- 5331-00-251-8839 PACKING,PREFORMEDMore Info ...
- CENTER HOLE DIAMETER
- 0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM
- CROSS-SECTIONAL HEIGHT
- 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
- HARDNESS RATING
- 90.0 SHORE DUROMETER A NOMINAL
- MATERIAL
- RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
- OUTSIDE DIAMETER
- 1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM
- 5331-01-027-3112 O-RINGMore Info ...
- ELONGATION PERCENTAGE
- 80 MAXIMUM
- CENTER HOLE DIAMETER
- 1.103 INCHES MINIMUM AND 1.115 INCHES MAXIMUM
- CROSS-SECTIONAL HEIGHT
- 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
- HARDNESS RATING
- 90.0 SHORE DUROMETER A NOMINAL
- MATERIAL
- RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
- 5331-01-093-3503 O-RINGMore Info ...
- CENTER HOLE DIAMETER
- 1.476 INCHES MINIMUM AND 1.502 INCHES MAXIMUM
- CROSS-SECTIONAL HEIGHT
- 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
- HARDNESS RATING
- 90.0 SHORE DUROMETER A NOMINAL
- MATERIAL
- RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
- OUTSIDE DIAMETER
- 1.610 INCHES MINIMUM AND 1.648 INCHES MAXIMUM
- 5331-01-093-3504 O-RINGMore Info ...
- ELONGATION PERCENTAGE
- 115 MAXIMUM
- CENTER HOLE DIAMETER
- 0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
- CROSS-SECTIONAL HEIGHT
- 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM
- HARDNESS RATING
- 90.0 SHORE DUROMETER A NOMINAL
- MATERIAL
- RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
- 5331-01-470-2578 PACKING,PREFORMEDMore Info ...
- ELONGATION PERCENTAGE
- 80 MAXIMUM
- CENTER HOLE DIAMETER
- 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM
- CROSS-SECTIONAL HEIGHT
- 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM
- HARDNESS RATING
- 90.0 SHORE DUROMETER A NOMINAL OVERALL
- MATERIAL
- RUBBER SYNTHETIC OVERALL
- 5331-00-804-5695 O-RINGMore Info ...
- CENTER HOLE DIAMETER
- 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM
- CROSS-SECTIONAL HEIGHT
- 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM
- END ITEM IDENTIFICATION
- RG-31 MRAP
- HARDNESS RATING
- 90.0 SHORE DUROMETER A NOMINAL
- MATERIAL
- RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
