NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 578433 results (0.32 seconds)
- 9530-00-224-1220 BAR,METALMore Info ...
- BASIC SHAPE STYLE
- ROUND
- CROSS SECTION OUTSIDE DIAMETER
- 2.250 INCHES NOMINAL
- FABRICATION METHOD
- ROLLED OR DRAWN OR COLD FINISH OR EXTRUDED
- HEAT TREATMENT
- T-6 SOLUTION HEAT TREATED
- MATERIAL
- ALUMINUM ALLOY AMS-QQ-A-200/2 OR AMS-QQ-A-225/4, ALLOY 2014
- 9530-01-262-8842 BAR,METALMore Info ...
- BASIC SHAPE STYLE
- ROUND
- CROSS SECTION OUTSIDE DIAMETER
- 5.000 INCHES NOMINAL
- FABRICATION METHOD
- COLD FINISH
- HEAT TREATMENT
- T-6 SOLUTION HEAT TREATED
- MATERIAL DOCUMENT AND CLASSIFICATION
- QQ-A-225/4 FED SPEC 1ST MATERIAL RESPONSE
- 9530-00-517-7725 BAR,METALMore Info ...
- BASIC SHAPE STYLE
- FLAT
- CROSS-SECTIONAL WIDTH
- 6.000 INCHES NOMINAL
- CROSS-SECTIONAL THICKNESS
- 1.0000 INCHES NOMINAL
- FABRICATION METHOD
- COLD FINISH
- HEAT TREATMENT
- T-6 SOLUTION HEAT TREATED
- 9530-00-288-0644 BAR,METALMore Info ...
- BASIC SHAPE STYLE
- ROUND
- CROSS SECTION OUTSIDE DIAMETER
- 3.000 INCHES NOMINAL
- FABRICATION METHOD
- COLD FINISH
- HEAT TREATMENT
- T-6 SOLUTION HEAT TREATED
- MATERIAL
- ALUMINUM ALLOY, AMS-QQ-A-225/4, ALLOY 2014
- 9530-00-232-5601 BAR,METALMore Info ...
- EDGE TYPE
- SQUARE
- BASIC SHAPE STYLE
- FLAT
- CROSS-SECTIONAL THICKNESS
- 0.7500 INCHES NOMINAL
- CROSS-SECTIONAL WIDTH
- 2.000 INCHES NOMINAL
- FABRICATION METHOD
- EXTRUDED OR COLD FINISH
- 9525-00-846-3671 WIRE,NONELECTRICALMore Info ...
- BASIC SHAPE STYLE
- ROUND
- CROSS SECTION OUTSIDE DIAMETER
- 0.250 INCHES NOMINAL
- HEAT TREATMENT
- T-6 SOLUTION HEAT TREATED
- MATERIAL DOCUMENT AND CLASSIFICATION
- QQ-A-225/4 FED SPEC SINGLE MATERIAL RESPONSE
- MATERIAL
- ALUMINUM ALLOY 2014
- 9530-00-232-1754 BAR,METALMore Info ...
- BASIC SHAPE STYLE
- ROUND
- CROSS SECTION OUTSIDE DIAMETER
- 0.375 INCHES NOMINAL
- FABRICATION METHOD
- COLD FINISH
- HEAT TREATMENT
- T-6 SOLUTION HEAT TREATED
- MATERIAL DOCUMENT AND CLASSIFICATION
- QQ-A-225/4 FED SPEC 1ST MATERIAL RESPONSE
- 9530-00-204-1072 BAR,METALMore Info ...
- EDGE TYPE
- SQUARE
- BASIC SHAPE STYLE
- FLAT
- CROSS-SECTIONAL WIDTH
- 4.000 INCHES NOMINAL
- CROSS-SECTIONAL THICKNESS
- 1.0000 INCHES NOMINAL
- FABRICATION METHOD
- EXTRUDED AND COLD FINISH
- 9530-00-224-1219 BAR,METALMore Info ...
- BASIC SHAPE STYLE
- ROUND
- CROSS SECTION OUTSIDE DIAMETER
- 1.750 INCHES NOMINAL
- FABRICATION METHOD
- COLD FINISH OR DRAWN OR EXTRUDED OR ROLLED
- HEAT TREATMENT
- T-6 SOLUTION HEAT TREATED
- MATERIAL
- ALUMINUM ALLOY AMS-QQ-A-200/2 OR AMS-QQ-A-225/4, ALLOY 2014
- 9530-00-596-8886 BAR,METALMore Info ...
- EDGE TYPE
- SQUARE
- BASIC SHAPE STYLE
- FLAT
- CROSS-SECTIONAL THICKNESS
- 0.3750 INCHES NOMINAL
- CROSS-SECTIONAL WIDTH
- 2.000 INCHES NOMINAL
- FABRICATION METHOD
- COLD FINISH
