NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 13077 results (0.08 seconds)
- 5331-00-983-8196 O-RINGMore Info ...
- 5331-00-783-6818 O-RINGMore Info ...
- ELONGATION PERCENTAGE
- 125 MAXIMUM
- CENTER HOLE DIAMETER
- 0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
- CROSS-SECTIONAL HEIGHT
- 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM
- MATERIAL
- RUBBER FLUOROCARBON CLASS FPM
- 5331-00-599-2938 O-RINGMore Info ...
- ELONGATION PERCENTAGE
- 125 MAXIMUM
- CENTER HOLE DIAMETER
- 0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
- CROSS-SECTIONAL HEIGHT
- 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM
- HARDNESS RATING
- 75.0 SHORE DUROMETER A NOMINAL
- MATERIAL
- RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
- 5331-00-599-2934 O-RINGMore Info ...
- 5331-00-043-5267 PACKING,PREFORMEDMore Info ...
- CROSS-SECTIONAL HEIGHT
- 0.094 INCHES NOMINAL
- MATERIAL
- RUBBER SYNTHETIC
- TEMP RATING
- -85.0 DEG FAHRENHEIT AND 401.0 DEG FAHRENHEIT
- 5331-01-093-3504 O-RINGMore Info ...
- ELONGATION PERCENTAGE
- 115 MAXIMUM
- CENTER HOLE DIAMETER
- 0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
- CROSS-SECTIONAL HEIGHT
- 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM
- HARDNESS RATING
- 90.0 SHORE DUROMETER A NOMINAL
- MATERIAL
- RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
- 5331-00-883-3834 PACKING,PREFORMEDMore Info ...
- ELONGATION PERCENTAGE
- 260 MAXIMUM
- CENTER HOLE DIAMETER
- 0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
- CROSS-SECTIONAL HEIGHT
- 0.093 INCHES NOMINAL
- HARDNESS RATING
- 70.0 SHORE DUROMETER A NOMINAL
- MATERIAL
- RUBBER SYNTHETIC
- 5331-00-625-8831 O-RINGMore Info ...
- CENTER HOLE DIAMETER
- 0.482 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
- CROSS-SECTIONAL HEIGHT
- 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM
- MATERIAL
- RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
- OUTSIDE DIAMETER
- 0.693 INCHES NOMINAL
- MATERIAL DOCUMENT AND CLASSIFICATION
- ASTM D2000 ASSN STD SINGLE MATERIAL RESPONSE
- 5331-01-625-3846 O-RINGMore Info ...
- CENTER HOLE DIAMETER
- 0.5 INCHES NOMINAL
- CROSS-SECTIONAL HEIGHT
- 0.003 INCHES MINIMUM AND 0.005 INCHES MAXIMUM
- END ITEM IDENTIFICATION
- VALVE, ANGLE R
- MATERIAL
- RUBBER FLUOROCARBON CLASS FPM
- PART NAME ASSIGNED BY CONTROLLING AGENCY
- O-RING, INSIDE RETAINER
- 7510-98-102-0009 TAPE,EMBOSSINGMore Info ...
