NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 397 results (0.08 seconds)
- 3040-01-221-5682 LEVER,MANUAL CONTROLMore Info ...
- 5995-23-113-3987 CABLE B18More Info ...
- 6340-01-525-3501 BRACKET,B18 REV 1,AMore Info ...
- 5305-00-907-3418 SCREW,MACHINEMore Info ...
- THREAD SERIES DESIGNATOR
- UNF
- NOMINAL THREAD DIAMETER
- 0.060 INCHES
- THREAD QUANTITY PER INCH
- 80
- THREAD CLASS
- 3A
- THREAD DIRECTION
- RIGHT-HAND
- 5305-00-143-9574 SCREW,MACHINEMore Info ...
- HARDNESS RATING
- 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
- NOMINAL THREAD DIAMETER
- 0.164 INCHES
- PART NAME ASSIGNED BY CONTROLLING AGENCY
- NAVY SPECIAL PROJECT
- SCREW SURFACE TREATMENT
- CADMIUM AND CHROMATE
- 5305-00-172-6301 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
- HARDNESS RATING
- 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
- HEAD DIAMETER
- 0.552 INCHES MINIMUM AND 0.563 INCHES MAXIMUM
- HEAD HEIGHT
- 0.191 INCHES MINIMUM AND 0.215 INCHES MAXIMUM
- HEAD STYLE
- FLAT CHAMFER
- 5310-01-297-7056 WASHER,LOCKMore Info ...
- 5305-01-224-2386 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.880 INCHES NOMINAL
- HEAD DIAMETER
- 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM
- HEAD HEIGHT
- 0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
- HEAD STYLE
- ROUND
- NOMINAL THREAD DIAMETER
- 0.164 INCHES
- 5305-00-917-7467 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
- HARDNESS RATING
- 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
- HEAD DIAMETER
- 0.265 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
- HEAD HEIGHT
- 0.088 INCHES MINIMUM AND 0.102 INCHES MAXIMUM
- HEAD HOLE CONFIGURATION STYLE
- ROUND
- 5305-01-107-3523 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 3.594 INCHES MINIMUM AND 3.688 INCHES MAXIMUM
- HARDNESS RATING
- 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
- HEAD DIAMETER
- 0.221 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
- HEAD HEIGHT
- 0.074 INCHES MINIMUM AND 0.086 INCHES MAXIMUM
- HEAD STYLE
- FLAT CHAMFER
