NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 28 results (0.03 seconds)
- 5305-01-323-7069 SCREW,CAP,SOCKET HEADMore Info ...
- CRITICALITY CODE JUSTIFICATION
- ZZZW
- DEPARTURE FROM CITED DOCUMENT
- QUALITY CONTROL IAW NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS
- FASTENER LENGTH
- 3.438 INCHES MINIMUM AND 3.562 INCHES MAXIMUM
- HEAD DIAMETER
- 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
- HEAD HEIGHT
- 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
- 5305-01-170-4115 SCREW,CAP,HEXAGON HEADMore Info ...
- CRITICALITY CODE JUSTIFICATION
- ZZZX
- DEPARTURE FROM CITED DESIGNATOR
- MATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
- THREAD DIRECTION
- RIGHT-HAND
- 5305-01-348-1726 SCREW,CAP,SOCKET HEADMore Info ...
- CRITICALITY CODE JUSTIFICATION
- ZZZW
- DEPARTURE FROM CITED DOCUMENT
- QUALITY CONTROL IAW NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS
- HEAD STYLE
- FLAT COUNTERSUNK UNDERCUT
- MATERIAL
- STEEL CORROSION RESISTING OVERALL
- NOMINAL THREAD DIAMETER
- 0.500 INCHES
- 5305-01-338-9760 SCREW,MACHINEMore Info ...
- CRITICALITY CODE JUSTIFICATION
- ZZZW
- DEPARTURE FROM CITED DOCUMENT
- MATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
- NOMINAL THREAD DIAMETER
- 0.375 INCHES
- SCREW MATERIAL
- STEEL
- THREAD SERIES DESIGNATOR
- UNC
- 5305-01-389-8193 SCREW,CAP,SOCKET HEADMore Info ...
- CRITICALITY CODE JUSTIFICATION
- ZZZW
- DEPARTURE FROM CITED DOCUMENT
- ITEM THAT SUPPORTS A LEVEL 1 OR SUBSAFE CRITICAL SYSTEM THAT HAS UNDERGONE QUALITY ASSURANCE DURING THE ACQUISITION
- MATERIAL DOCUMENT AND CLASSIFICATION
- MIL-B-24059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
- MATERIAL
- NICKEL ALLOY OVERALL
- NOMINAL THREAD DIAMETER
- 0.375 INCHES
- 5305-01-297-8622 SCREW,CAP,SOCKET HEADMore Info ...
- END ITEM IDENTIFICATION
- ANTENNA
- CRITICALITY CODE JUSTIFICATION
- ZZZX
- DEPARTURE FROM CITED DESIGNATOR
- QUALITY CONTROL IAW NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS
- MATERIAL
- NICKEL ALLOY 500 OVERALL
- NOMINAL THREAD DIAMETER
- 0.250 INCHES
- 5305-01-323-1585 SCREW,CAP,SOCKET HEADMore Info ...
- CRITICALITY CODE JUSTIFICATION
- ZZZX
- DEPARTURE FROM CITED DESIGNATOR
- QUALITY CONTROL IAW NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS
- HEAD DIAMETER
- 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
- HEAD HEIGHT
- 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
- HEAD STYLE
- PAN NO. 2
- 5306-00-145-0882 BOLT,INTERNAL WRENCHINGMore Info ...
- CRITICALITY CODE JUSTIFICATION
- ZZZX
- DEPARTURE FROM CITED DESIGNATOR
- QUALITY CONTROL IAW NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS
- FASTENER LENGTH
- 1.500 INCHES NOMINAL
- HARDNESS RATING
- 36.0 ROCKWELL C MINIMUM OVERALL AND 45.0 ROCKWELL C MAXIMUM OVERALL
- HEAD DIAMETER
- 0.921 INCHES MINIMUM AND 0.937 INCHES MAXIMUM
- 5305-01-269-0312 SCREW,CAP,SOCKET HEADMore Info ...
- CRITICALITY CODE JUSTIFICATION
- ZZZY
- REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
- QUALITY CONTROL IAW NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS
- 5305-01-385-8557 SCREW,CAP,SOCKET HEADMore Info ...
- CRITICALITY CODE JUSTIFICATION
- ZZZW
- DEPARTURE FROM CITED DOCUMENT
- QUALITY CONTROL IAW NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS
- MATERIAL
- NICKEL ALLOY OVERALL
- NOMINAL THREAD DIAMETER
- 0.625 INCHES
- NONDEFINITIVE SPEC/STD DATA
- 6 TYPE
