NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 6562 results (0.09 seconds)
- 5305-00-009-1784 SCREW,MACHINEMore Info ...
- 5305-01-123-3684 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.188 INCHES NOMINAL
- HEAD DIAMETER
- 0.146 INCHES MINIMUM AND 0.162 INCHES MAXIMUM
- HEAD HEIGHT
- 0.069 INCHES MAXIMUM
- HEAD STYLE
- ROUND
- MINIMUM TENSILE STRENGTH
- 55000 POUNDS PER SQUARE INCH
- 5305-01-127-0793 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.750 INCHES NOMINAL
- HEAD HEIGHT
- 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM
- HEAD DIAMETER
- 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
- HEAD STYLE
- ROUND
- MINIMUM TENSILE STRENGTH
- 60000 POUNDS PER SQUARE INCH
- 5305-01-015-9664 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 82.0 DEGREES NOMINAL
- FASTENER LENGTH
- 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
- HEAD DIAMETER
- 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
- HEAD HEIGHT
- 0.058 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK UNDERCUT
- 5305-00-282-4816 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.750 INCHES NOMINAL
- HEAD DIAMETER
- 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- MINIMUM TENSILE STRENGTH
- 55000 POUNDS PER SQUARE INCH
- 5305-00-308-9564 SCREW,MACHINEMore Info ...
- DEPARTURE FROM CITED DOCUMENT
- AS MODIFIED BY REVISION A
- FASTENER LENGTH
- 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
- HEAD HEIGHT
- 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
- HEAD DIAMETER
- 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
- HEAD STYLE
- PAN NO. 2
- 5305-00-145-1039 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 1.312 INCHES MINIMUM AND 1.375 INCHES MAXIMUM
- HEAD DIAMETER
- 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM
- HEAD HEIGHT
- 0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM
- HEAD STYLE
- PAN NO. 2
- MINIMUM TENSILE STRENGTH
- 80000 POUNDS PER SQUARE INCH
- 5305-00-145-6896 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.750 INCHES NOMINAL
- HEAD DIAMETER
- 0.443 INCHES MINIMUM AND 0.472 INCHES MAXIMUM
- HEAD HEIGHT
- 0.160 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
- HEAD STYLE
- ROUND
- MINIMUM TENSILE STRENGTH
- 60000 POUNDS PER SQUARE INCH
- 5305-00-145-7001 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
- HEAD DIAMETER
- 0.150 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- MINIMUM TENSILE STRENGTH
- 55 POUNDS PER SQUARE INCH
- 5305-00-290-3038 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.750 INCHES NOMINAL
- HEAD HEIGHT
- 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM
- HEAD DIAMETER
- 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
- HEAD STYLE
- ROUND
- MINIMUM TENSILE STRENGTH
- 55000 POUNDS PER SQUARE INCH
