NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 49 results (0.23 seconds)
- 5305-00-151-3220 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.469 INCHES NOMINAL
- HEAD DIAMETER
- 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- NOMINAL THREAD DIAMETER
- 0.190 INCHES
- 5305-00-167-3678 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 1.813 INCHES MINIMUM AND 1.875 INCHES MAXIMUM
- HEAD DIAMETER
- 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- NOMINAL THREAD DIAMETER
- 0.190 INCHES
- 5305-00-144-4024 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.500 INCHES NOMINAL
- HEAD DIAMETER
- 0.175 INCHES MINIMUM AND 0.199 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- MINIMUM TENSILE STRENGTH
- 55000 POUNDS PER SQUARE INCH
- 5305-00-151-2599 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.750 INCHES NOMINAL
- HEAD DIAMETER
- 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- MINIMUM TENSILE STRENGTH
- 55000 POUNDS PER SQUARE INCH
- 5305-00-151-3221 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.375 INCHES NOMINAL
- HEAD DIAMETER
- 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- MINIMUM TENSILE STRENGTH
- 55000 POUNDS PER SQUARE INCH
- 5305-00-167-3683 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM
- HEAD DIAMETER
- 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- MINIMUM TENSILE STRENGTH
- 55000 POUNDS PER SQUARE INCH
- 5305-00-151-3222 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
- HEAD DIAMETER
- 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
- HEAD HEIGHT
- 0.069 INCHES MINIMUM AND 0.081 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK UNDERCUT
- 5305-00-145-6936 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
- HEAD DIAMETER
- 0.200 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- MINIMUM TENSILE STRENGTH
- 55000 POUNDS PER SQUARE INCH
- 5305-00-150-9786 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.500 INCHES NOMINAL
- HEAD DIAMETER
- 0.225 INCHES MINIMUM AND 0.252 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- MINIMUM TENSILE STRENGTH
- 55000 POUNDS PER SQUARE INCH
- 5305-00-150-9329 SCREW,MACHINEMore Info ...
- COUNTERSINK ANGLE
- 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 2.500 INCHES NOMINAL
- HEAD DIAMETER
- 0.300 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- MINIMUM TENSILE STRENGTH
- 62000 POUNDS PER SQUARE INCH
