NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 47 results (0.02 seconds)
- 4820-00-203-2973 VALVE,EXPANSIONMore Info ...
- END CONNECTION QUANTITY
- 2
- BODY MATERIAL
- BRASS
- BODY STYLE
- ANGLE GIVE "ADQM" OR "ADQN" IF FLANGED ONE OR TWO ENDS
- BULB DIAMETER
- 0.500 INCHES NOMINAL
- BULB LENGTH
- 3.000 INCHES NOMINAL
- 5999-00-042-8399 DELAY LINEMore Info ...
- FREQUENCY BANDWIDTH
- 9000.0 KILOHERTZ NOMINAL
- MOUNTING FACILITY
- TERMINAL
- OPERATING TEMP RANGE
- -55.0/+125.0 DEG CELSIUS
- OUTPUT IMPEDANCE RATING
- 100.000 OHMS
- INDIVIDUAL SECTION QUANTITY
- 1
- 8140-99-967-4122 SHIPPING AND STORAGE CONTAINER,MUNITIONSMore Info ...
- 3120-00-287-7499 BEARING,SLEEVEMore Info ...
- BODY INSIDE DIAMETER
- 0.8760 INCHES MINIMUM AND 0.8770 INCHES MAXIMUM
- BODY OUTSIDE DIAMETER
- 1.2530 INCHES MINIMUM AND 1.2540 INCHES MAXIMUM
- CORNER SHAPE
- ROUND LEFT FLANGE BODY CORNER
- CORNER SHAPE
- SQUARE INSIDE RIGHT CORNER
- CORNER SHAPE
- SQUARE INSIDE LEFT CORNER
- 4330-00-168-1861 FILTER ELEMENT,FLUIDMore Info ...
- 5310-01-592-8544 WASHER,SPRING TENSIONMore Info ...
- END ITEM IDENTIFICATION
- 85A060004-DRIVE ASSY,LCS,HANGAR DOOR
- PART NAME ASSIGNED BY CONTROLLING AGENCY
- SPRING,DISC
- 5306-00-741-1760 BOLT,SQUARE NECKMore Info ...
- FASTENER LENGTH
- 0.875 INCHES NOMINAL
- HARDNESS RATING
- 26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL
- HEAD HEIGHT
- 0.125 INCHES NOMINAL
- HEAD DIAMETER
- 0.562 INCHES NOMINAL
- HEAD STYLE
- BUTTON
- 5310-01-024-4816 NUT,SELF-LOCKING,PLATEMore Info ...
- DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER
- 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
- CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH
- 0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM
- FEATURES PROVIDED
- FLOATING NUT
- MATERIAL
- IRON ALLOY 660 OVERALL
- MOUNTING HOLE DIAMETER
- 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
- 2540-99-666-2862 MOTOR,HYDRAULICMore Info ...
- 5310-01-135-4158 NUT,SELF-LOCKING,PLATEMore Info ...
