NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 646 results (0.08 seconds)
- 5110-00-293-3029 REAMER,HANDMore Info ...
- ADJUSTMENT RANGE
- +0.845/+0.895 INCHES
- FLUTE CUT DIRECTION
- RIGHT-HAND OR LEFT-HAND
- FLUTE DESIGN
- SPIRAL
- FLUTE LENGTH
- 2.375 INCHES NOMINAL
- MATERIAL
- STEEL
- 5110-00-293-3027 REAMER,HANDMore Info ...
- ADJUSTMENT RANGE
- +1.281/+1.336 INCHES
- FLUTE CUT DIRECTION
- LEFT-HAND OR RIGHT-HAND
- FLUTE DESIGN
- SPIRAL
- FLUTE LENGTH
- 3.375 INCHES MINIMUM AND 3.500 INCHES MAXIMUM
- MATERIAL
- STEEL
- 5110-00-199-0467 REAMER,HANDMore Info ...
- SHANK TYPE
- STRAIGHT ROUND W/SQUARE END
- OVERALL LENGTH
- 8.000 INCHES NOMINAL
- REAMER TYPE
- HAND
- DIAMETER
- 0.390 INCHES NOMINAL
- PILOT TYPE
- FLUTED
- 3455-00-236-0719 REAMER,MACHINEMore Info ...
- CUTTING EDGE TIP MATERIAL
- STEEL, HIGH SPEED
- DIAMETER
- 1.375 INCHES NOMINAL
- FLUTE CUT DIRECTION
- RIGHT-HAND
- FLUTE DESIGN
- STRAIGHT
- FLUTE LENGTH
- 6.313 INCHES NOMINAL
- 5110-00-194-6045 REAMER,HANDMore Info ...
- SHANK TYPE
- STRAIGHT ROUND W/SQUARE END
- OVERALL LENGTH
- 9.750 INCHES NOMINAL
- REAMER TYPE
- HAND
- DIAMETER
- 0.8593 INCHES NOMINAL
- MATERIAL
- STEEL
- 5110-00-293-3035 REAMER,HANDMore Info ...
- ADJUSTMENT RANGE
- +1.185/+1.240 INCHES
- FLUTE CUT DIRECTION
- RIGHT-HAND OR LEFT-HAND
- FLUTE DESIGN
- SPIRAL
- FLUTE LENGTH
- 3.063 INCHES NOMINAL
- MATERIAL
- STEEL
- 3455-21-102-8617 REAMER,SHELL,FLUTEDMore Info ...
- 5110-00-801-1430 REAMER,HANDMore Info ...
- ADJUSTMENT RANGE
- +1.406/+1.461 INCHES
- FLUTE CUT DIRECTION
- RIGHT-HAND OR LEFT-HAND
- FLUTE DESIGN
- SPIRAL
- FLUTE LENGTH
- 3.375 INCHES NOMINAL
- MATERIAL
- STEEL
- 3455-21-102-8603 REAMER,SHELL,FLUTEDMore Info ...
- 5110-00-186-4211 REAMER,HANDMore Info ...
- SHANK TYPE
- STRAIGHT ROUND W/SQUARE END
- OVERALL LENGTH
- 8.875 INCHES NOMINAL
- REAMER TYPE
- TAPER SOCKET FINISHING
- TAPER SOCKET SIZE FOR WHICH DESIGNED
- 9 BROWN AND SHARPE
- MATERIAL
- STEEL
