NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 1168 results (0.05 seconds)
- 5955-01-627-5544 CRYSTAL UNIT,QUARTZMore Info ...
- END ITEM IDENTIFICATION
- COMMON AIR ROUTE SURV RADAR (CARSR)
- PART NAME ASSIGNED BY CONTROLLING AGENCY
- CRYSTAL OSCILLATOR
- SPECIAL FEATURES
- 1279 MHZ CCO RF LOW PHASE NOISE
- 4410-01-188-4510 SCANNER TUBEMore Info ...
- 9350-00-229-4136 BRICK,REFRACTORY,ARCHMore Info ...
- MATERIAL
- CLAY,FIRE
- MINIMUM RUPTURE MODULUS
- 500.0 POUNDS PER SQUARE INCH
- MINOR THICKNESS
- 1.750 INCHES NOMINAL
- NONDEFINITIVE SPEC/STD DATA
- B GRADE
- LENGTH
- 9.000 INCHES NOMINAL
- 2920-00-366-9751 COIL,MAGNETOMore Info ...
- 5330-00-292-7500 GASKETMore Info ...
- APERTURE LENGTH
- 3.141 INCHES NOMINAL
- APERTURE WIDTH
- 2.391 INCHES NOMINAL
- BEARING SURFACE WIDTH
- 0.125 INCHES NOMINAL
- CROSS-SECTIONAL SHAPE STYLE
- SOLID SINGLE OR COMPOSITION
- CROSS-SECTIONAL THICKNESS
- 0.027 INCHES MINIMUM AND 0.031 INCHES MAXIMUM
- 3120-00-288-1078 BEARING,SLEEVEMore Info ...
- BODY INSIDE DIAMETER
- 0.5135 INCHES MINIMUM AND 0.5145 INCHES MAXIMUM
- BODY OUTSIDE DIAMETER
- 0.6890 INCHES MINIMUM AND 0.6900 INCHES MAXIMUM
- CORNER SHAPE
- SQUARE ALL CORNERS
- MATERIAL
- COPPER ALLOY OVERALL
- LUBRICATION MATERIAL
- LUBRICATING OIL
- 5330-00-292-1593 SEAL,PLAIN ENCASEDMore Info ...
- ACCOMMODATED SHAFT DIAMETER
- 2.250 INCHES NOMINAL
- ACCOMMODATED SHAFT MAXIMUM RATED SPEED
- 2000 FEET PER MINUTE
- CASE STYLE
- SQUARE
- HOUSING BORE DIAMETER
- 3.350 INCHES NOMINAL
- MATERIAL
- LEATHER SEALING ELEMENT OR RUBBER SYNTHETIC SEALING ELEMENT
- 3020-00-517-1656 PULLEY,GROOVEMore Info ...
- DISTANCE FROM CENTER OF BORE TO BOTTOM OF KEYWAY
- 0.625 INCHES NOMINAL
- DISTANCE FROM OUTSIDE FLANGE/RIM TO HUB END AND LOCATION
- 0.438 INCHES NOMINAL AA END AND 0.313 INCHES NOMINAL BB END
- BEARINGS
- NOT INCLUDED
- BORE DIAMETER
- 1.000 INCHES NOMINAL
- BORE FEATURE
- INCLUDED
- 5330-01-188-4630 GASKETMore Info ...
- 2920-00-371-4611 CLAMP,IGNITION CABL3More Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- STEEL,0.031 IN. THK;0.500 IN. W X 4 IN. LG @W/ONE 0.345 IN. DIA HOLE 0.312 IN. FROM END
