NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 11 results (0.02 seconds)
- 7643-01-401-6413 TOPOGRAPHIC GEOSPATIAL PRODUCTSMore Info ...
- 5365-01-398-0723 SPACER,SLEEVEMore Info ...
- 5310-00-253-8259 NUT,PLAIN,SPLINEMore Info ...
- COUNTERSINK ANGLE
- 45.0 DEGREES NOMINAL NUT
- MATERIAL
- STEEL COMP 303 OVERALL OR STEEL COMP 302 OVERALL
- NOMINAL THREAD SIZE
- 0.138 INCHES
- NUT DIAMETER
- 0.247 INCHES MINIMUM AND 0.253 INCHES MAXIMUM
- NUT HEIGHT
- 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
- 5315-00-177-1346 PIN,SHOULDER,HEADLESSMore Info ...
- FIRST END STYLE
- CHAMFERED
- FIRST END TAPER ANGLE
- 45.0 DEGREES NOMINAL
- FIRST END TAPER LENGTH
- 0.010 INCHES NOMINAL
- FIRST END LOCATION
- SHANK END
- MATERIAL DOCUMENT AND CLASSIFICATION
- MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
- 5306-00-316-5557 BOLT,INTERNALLY RELIEVED BODYMore Info ...
- DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER
- 4.200 INCHES NOMINAL FIRST HOLE
- CONCENTRIC HOLE DEPTH
- 0.810 INCHES NOMINAL
- CONCENTRIC HOLE DIAMETER
- 0.375 INCHES NOMINAL
- CRITICALITY CODE JUSTIFICATION
- AAVH
- FASTENER LENGTH
- 4.500 INCHES NOMINAL
- 3895-00-160-3386 BODY,SWIVEL JOINTMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- 2STEEL,PAINTED GRAY,4.500 IN. O/A LG;2.000 IN. BORE DIA;1ST END 3.000 IN. OD,INTERNALLY THD,2-1/2 IN.-12,UN,2B,RH THD SIZE 1-9/64 IN. THD LG;2ND END SPHERICAL BALL SHAPE,3.391 IN. OD,1.695 IN. RADIUS,3.000 IN. RECESS DIA,0.625 IN. RECESS DEPTH
- 5306-00-909-0920 BOLT,SHOULDERMore Info ...
- FASTENER LENGTH
- 4.593 INCHES NOMINAL
- HARDNESS RATING
- 39.0 ROCKWELL C MINIMUM OVERALL AND 42.0 ROCKWELL C MAXIMUM OVERALL
- HEAD DIAMETER
- 1.625 INCHES NOMINAL
- HEAD HEIGHT
- 0.344 INCHES NOMINAL
- HEAD STYLE
- ROUND W/WRENCH FLATS
- 5310-01-015-9787 NUT,PLAIN,SPLINEMore Info ...
- MATERIAL
- STEEL COMP 303 OVERALL
- NOMINAL THREAD SIZE
- 0.190 INCHES
- NUT DIAMETER
- 0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM
- NUT HEIGHT
- 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
- NUT STYLE
- SPLINE
- 5315-01-117-3631 PIN,SHOULDER,HEADLESSMore Info ...
- FIRST END COUNTERSINK ANGLE
- 60.0 DEGREES NOMINAL
- FIRST END COUNTERSINK DIAMETER
- 0.125 INCHES NOMINAL
- FIRST END LOCATION
- BOTH ENDS
- FIRST END STYLE
- CHAMFERED AND COUNTERSUNK
- FIRST END TAPER ANGLE
- 45.0 DEGREES NOMINAL
- 5315-01-260-7844 PIN,STRAIGHT,HEADEDMore Info ...
- DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN
- 0.115 INCHES MINIMUM AND 0.186 INCHES MAXIMUM
- CHAMFER LENGTH
- 0.035 INCHES MAXIMUM
- DIAMETER
- 0.170 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
- FIRST HOLE DIAMETER
- 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM
- HEAD STYLE
- FLAT
