NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 62 results (0.04 seconds)
- 5935-01-020-4056 CLAMP,CABLE,ELECTRICAL CONNECTORMore Info ...
- 6720-00-153-4044 SLEEVE ASSEMBLYMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- CONSISTS OF SLEEVE,TAPER 1,PIN,ROLL 1
- END ITEM IDENTIFICATION
- CAMERA,STILL PICTURE TYPE KG-13A
- FSC APPLICATION DATA
- MIRROR CELL ASSEMBLY
- 3120-00-428-7543 BEARING,SLEEVEMore Info ...
- BODY INSIDE DIAMETER
- 0.5144 INCHES MINIMUM AND 0.5145 INCHES MAXIMUM
- BODY OUTSIDE DIAMETER
- 0.7510 INCHES MINIMUM AND 0.7520 INCHES MAXIMUM
- CORNER SHAPE
- SQUARE ALL CORNERS
- MATERIAL
- COPPER ALLOY OVERALL
- OVERALL LENGTH
- 0.4060 INCHES NOMINAL
- 4820-66-073-6629 VALVE,GLOBEMore Info ...
- 5895-01-447-3999 CONVERTER,SIGNAL DATAMore Info ...
- END ITEM IDENTIFICATION
- CV-4229(V)5/AVS-7(V)
- 5305-01-187-0480 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.359 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
- HEAD HEIGHT
- 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
- HEAD HOLE CONFIGURATION STYLE
- HEXAGON FLATS
- HEAD STYLE
- HEXAGON
- HOLE DIAMETER
- 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM
- 3110-00-100-0507 CUP,TAPERED ROLLER BEARINGMore Info ...
- MATERIAL
- STEEL OVERALL
- OUTSIDE DIAMETER
- 6.3750 INCHES NOMINAL
- OVERALL WIDTH
- 1.2500 INCHES NOMINAL
- BACKFACE CORNER RADIUS
- 0.1250 INCHES NOMINAL
- STANDARD TOLERANCE DESIGNATION
- AFBMA CLASS 2
- 5305-01-159-4487 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.859 INCHES MINIMUM AND 0.906 INCHES MAXIMUM
- HARDNESS RATING
- 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
- HEAD HEIGHT
- 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
- HEAD HOLE CONFIGURATION STYLE
- HEXAGON FLATS
- HEAD STYLE
- HEXAGON
- 5305-01-134-9360 SCREW,MACHINEMore Info ...
- FASTENER LENGTH
- 0.546 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
- HEAD HEIGHT
- 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
- HEAD HOLE CONFIGURATION STYLE
- HEXAGON CORNERS
- HEAD STYLE
- HEXAGON
- HOLE DIAMETER
- 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM
- 5305-13-010-0311 SCREW,MACHINEMore Info ...
