NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 14891 results (0.07 seconds)
- 3408-01-084-1536 MACHINING CENTERMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- SPINDLE MOTOR HP 10;CAPACITY (IN SAE 3020 STEEL) DRILL,DIA,IN. 1.75,TAP,DIA,IN.,1.50,MILL,CVBIC IN. PER MIN. 10;SPINDLE SPEEDS 32;SPINDLE SPEED RANGE,RPM 70-3000;SPINDLE FEED,NUMBER INFINITE;SPINDLE FEED RATE RANGE (IN. PER MINUTE) 0.5 TO 200;SPINDLE TRAVEL 12IN.;SPINDLE RAPID TRAVERSE RATE (IN. PER MINUTE) 200;MACHINING HEAD VERTICALTRAVEL 20.0IN.;MACHINING HEAD VERTICALRAPID TRAVERSE RATE 200.0IPM;WORK MOVNTING SURFACE 54 BY 20IN.;LOAD CAPACITY 3000LBS;WORKTABLE TRAVEL X-AXIS 90IN. Y-AXIS 26IN.;WORKTABLE RAPID TRAVERSE RATE 200.0IPM;MILLING FEEDS,MUNBER,200;MILLING FEED RATE RANGE INFINITE
- 3408-01-160-5457 BORING-DRILLING-MILLING MACHINE,More Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- 015 HP;X Y AND Z AXIS;30-3000 RPM;ELEC DC MOTOR;CAST IRON CONSTRUCTION;TABLE TRAVEL 20 IN. BY 40 IN.;30 TOOL STORAGE;30-3000 RPM;230/460 V;3 PHASE;60 HZ;MAX TOOL WT 30 LBS;MAX TOOL DIA 4.5 IN.;MAX TOOL LG 11.75 IN.;POWERHAWK COLUMN MOUNT CNC
- 3408-01-311-6673 MACHINING CENTERMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- X AXIS 40.000 IN; Y AXIS 22.000 IN; Z AXIS 20.000 IN; SPINDLE NOSE TO WEAR PLATE 6.600 IN - 25.500 IN; THROAT CLEARANCE 28.000 IN; TABLE SIZE 48.000 IN. X 24.000 IN; WEIGHT CAPACITY 4000 LBS; SPINDLE DRIVE MOTOR 15 HP; MIN RPM @ FULL HP 150; SPEED RANGE RPM 50 -4000; FEED RATES - X/Y 1-400 IPM Z 1-300 IMPL TOOLING NO. 50 TAPER NS W/POWER DRAW BAR STANDARD; COOLANT FLOOD AND MIST SYSTEM
- 3408-01-380-8565 MACHINING CENTERMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- MILLING CAP. 22 CU IN./MIN;DRILLING CAP. 2.0 IN.;TAPPING CAP. 2.0 IN.;O/A SIZE 78.7 BY 34.3 IN.;WORKING SURFACE 66.9 BY 27.6 IN.;T-SLOTS 5 BY 0.71 IN.;20 HP;3 PHASE;AC;TOOL HOLDER NO. 50 V-FLANGE;NO. STATIONS 20;MAX TOOL DIA 5.5 IN. ADJACENT, 7.8 IN. NONADJACENT;MAX TOOL WT 33 LBS;MAX TOOL LENGTH 12 IN.;35 KVA;60 HZ;208 VAC AT 80 AMP;240 VAC AT 70 AMP;480 VAC AT 35 AMP;600 VAC AT 30 AMP
- 3040-27-005-7263 MIL, AMORTISOR 81 MMore Info ...
- 3040-27-060-0425 MILMore Info ...
- 2540-27-058-4752 MILMore Info ...
- 4320-27-037-5436 MILMore Info ...
- 1010-27-006-2086 MILMore Info ...
- 2520-27-037-5505 MILMore Info ...
