NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 5 results (0.03 seconds)
- 5310-00-558-7146 NUT SPACER,PLATEMore Info ...
- CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH
- 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM
- DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER
- 0.341 INCHES MINIMUM AND 0.347 INCHES MAXIMUM
- MATERIAL DOCUMENT AND CLASSIFICATION
- QQ-A-250/8,ALLOY 5052,TEMPER H32 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-250/8,H34 FED SPEC 2ND MATERIAL RESPONSE OVERALL OR QQ-A-250/8,A36 FED SPEC 3RD MATERIAL RESPONSE OVERALL
- MATERIAL
- ALUMINUM ALLOY 5052 OVERALL
- MOUNTING HOLE DIAMETER
- 0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM
- 5310-00-006-8269 NUT SPACER,PLATEMore Info ...
- 5310-00-316-8163 NUT SPACER,PLATEMore Info ...
- CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH
- 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM
- DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER
- 0.341 INCHES MINIMUM AND 0.347 INCHES MAXIMUM
- MATERIAL DOCUMENT AND CLASSIFICATION
- QQ-A-250/8 ALLOY 5052,TEMP H32 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-250/8,H34 FED SPEC 2ND MATERIAL RESPONSE OVERALL OR QQ-A-250/8,H36 FED SPEC 3RD MATERIAL RESPONSE OVERALL
- MATERIAL
- ALUMINUM ALLOY 5052 OVERALL
- MOUNTING HOLE ARRANGEMENT STYLE
- 2 HOLES
- 5310-01-299-7625 NUT SPACER,PLATEMore Info ...
- DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER
- 0.341 INCHES MINIMUM AND 0.347 INCHES MAXIMUM
- CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH
- 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM
- MATERIAL DOCUMENT AND CLASSIFICATION
- QQ-A-250/13,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
- MATERIAL
- ALUMINUM ALLOY 7075 OVERALL
- MOUNTING HOLE ARRANGEMENT STYLE
- 2 HOLES
- 5310-00-721-7734 NUT SPACER,PLATEMore Info ...
- CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH
- 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM
- DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER
- 0.341 INCHES MINIMUM AND 0.347 INCHES MAXIMUM
- MATERIAL DOCUMENT AND CLASSIFICATION
- QQ-A-318 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
- MATERIAL
- ALUMINUM ALLOY 5052 OVERALL
- MOUNTING HOLE ARRANGEMENT STYLE
- 2 HOLES
