NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 249 results (3.94 seconds)
- 2815-00-739-6098 VALVE,POPPET,ENGINEMore Info ...
- DISTANCE FROM FIRST GROOVE TO STEM END
- 0.0312 INCHES NOMINAL
- DISTANCE FROM SECOND GROOVE TO STEM END
- 0.5312 INCHES NOMINAL
- CARBON RELIEF GROOVE
- NOT INCLUDED
- CHAMFER ANGLE IN DEG
- 45.0
- CHAMFER LENGTH
- 0.0156 INCHES NOMINAL
- 2815-00-944-7064 CRANKSHAFT,ENGINEMore Info ...
- 3120-00-974-7617 BEARING,WASHER,THRUSTMore Info ...
- 2815-00-857-1521 VALVE,POPPET,ENGINEMore Info ...
- DISTANCE FROM GROOVE TO STEM END
- 0.5938 NOMINAL INCHES
- CARBON RELIEF GROOVE
- NOT INCLUDED
- GROOVE WIDTH
- 0.0938 INCHES NOMINAL
- GROOVE DIAMETER
- 0.3330 INCHES NOMINAL
- HEAD HEIGHT
- 0.1562 INCHES NOMINAL
- 2815-00-930-9311 CYLINDER HEAD,DIESEL ENGINEMore Info ...
- SPECIAL FEATURES
- 7COUNTERBORES MUST PRODUCE 0.001-0.003 INTERFERENCE FIT W/INSERTS (SHRINK FIT);COUNTERBORES FOR INSERTS MUST BE CONCENTRIC W/ID OF VALVE GUIDES W/I 0.005 T.I.R.;INTAKE COUNTERBORE SHOULDER SURFACE MUST BE SQUARE W/ID OF VALVE GUIDE W/I 0.02 T.I.R.;
- 2815-00-890-2354 VALVE,POPPET,ENGINEMore Info ...
- CARBON RELIEF GROOVE
- NOT INCLUDED
- HEAD STYLE
- FLAT
- OUTSIDE DIAMETER
- 2.2500 INCHES NOMINAL
- SEAT ANGLE IN DEG
- 45.0
- STEM DIAMETER
- 0.4970 INCHES NOMINAL
- 2815-00-271-9079 VALVE,POPPET,ENGINEMore Info ...
- DISTANCE FROM GROOVE TO STEM END
- 0.1860 INCHES NOMINAL
- CARBON RELIEF GROOVE
- NOT INCLUDED
- CHAMFER ANGLE IN DEG
- 45.0
- CHAMFER LENGTH
- 0.0200 INCHES MINIMUM AND 0.0400 INCHES MAXIMUM
- DEPARTURE FROM CITED DOCUMENT
- MILE11276 PARAGRAPH 3.8.3 VALVES
- 2815-00-617-7634 CRANKSHAFT,ENGINEMore Info ...
- END ITEM IDENTIFICATION
- 6115-00-933-3498
- NONSUPPLY ITEMS AND QUANTITIES
- CRANKSHAFT 1; GEAR 1; KEY 1; PLUG 6
- SPECIAL FEATURES
- STEEL
- 3120-00-080-6741 BEARING,SLEEVEMore Info ...
- 3120-00-994-4419 BEARING HALF,SLEEVEMore Info ...
