NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 577648 results (0.41 seconds)
- 1680-00-010-9573 END ASSY,TELESCOPICMore Info ...
- 5330-01-264-3634 RETAINER,PACKINGMore Info ...
- CROSS-SECTIONAL HEIGHT
- 0.250 INCHES NOMINAL
- MATERIAL DOCUMENT AND CLASSIFICATION
- ASTM A479,CONDITION A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
- PERIPHERAL DIAMETER
- 4.000 INCHES NOMINAL
- SPECIAL FEATURES
- CONSISTS OF EIGHT 0.090 IN. WIDTH OUTSIDE GROOVES
- 3020-01-323-2772 PULLEY,GROOVEMore Info ...
- 4920-01-294-0930 FIXTURE,AIRCRAFT MAINTENANCEMore Info ...
- END ITEM IDENTIFICATION
- LANTIRN MOBILE SHELTER SET
- FUNCTIONAL DESCRIPTION
- ROTATING FIXTURE IS USED TO HOLD THE UNIT UNDER TEST (UUT) DURING TESTIING
- SPECIAL FEATURES
- C/O:SUPPORT ASSEMBLY;HANDLE,DRIVE;SHAFT,DRIVE;ARM ASSEMBLY;BEARING,CONE;PIN,SPRING;IDENTIFICATION PLATE;
- 5990-01-286-0601 ADAPTER,SYNCHROMore Info ...
- OVERALL DIAMETER
- 2.205 INCHES MINIMUM AND 2.215 INCHES MAXIMUM
- OVERALL LENGTH
- 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
- USAGE DESIGN
- RETAINER RING THAT SECURES A SYNCHRO RESOLVER FOR PITCH AND YAW MOTION
- 5307-01-314-4968 STUD,SHOULDERED AND STEPPEDMore Info ...
- END ITEM IDENTIFICATION
- LAN TARGETING POD/PYLON/F16
- MATERIAL
- STEEL COMP XM-13
- NOMINAL THREAD SIZE
- 0.562 INCHES NUT THREAD
- NOMINAL THREAD SIZE
- 2.500 INCHES STUD THREAD
- NUT END SHANK DIAMETER
- 1.500 INCHES NOMINAL
- 1560-00-071-7811 FLOOR PLATE ASSYMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- MAGNESIUM ALLOY,COMPOSITION AZ91,TEMPER T6; 21.550 IN. NOM O/A LG
- 1240-01-374-2109 RETAINER,OPTICAL ELEMENTMore Info ...
- SPECIAL FEATURES
- ITEM IS A CLAMP ASSY.LENS-WFOV NO. 1 USED IN THE TARGET POD,LANTIRN PROJECT.
- 3020-01-327-8575 PULLEY,GROOVEMore Info ...
- 1240-01-320-0121 RETAINER,OPTICAL ELEMENTMore Info ...
- GUIDE DESIGN
- THREAD CHAMFER
- GUIDE LOCATION
- BOTH EDGES
- HOLE CHAMFER ANGLE IN DEG
- 15.0
- HOLE CHAMFER DIAMETER
- 1.715 INCHES MINIMUM AND 1.725 INCHES MAXIMUM
- HOLE DIAMETER
- 1.570 INCHES MINIMUM AND 1.575 INCHES MAXIMUM
