NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 981538 results (0.10 seconds)
- 1615-00-104-7369 CAM ASSY,MAIN GEARMore Info ...
- 3540-00-278-1251 STRETCHER,STRAPPING,HANDMore Info ...
- CUTOFF DEVICE
- NOT INCLUDED
- SEAL TYPE ACCOMMODATED
- CLOSED
- SPECIAL FEATURES
- FOR APPLYING FLAT STEEL STRAPPING ON BALES, BOXES, BUNDLES, CARTONS, CRATES, PALLETS AND FREIGHT BRACING
- STRAP THICKNESS
- 0.028 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
- STRAP WIDTH
- 0.750 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
- 3540-00-234-6742 SEALER,STEEL STRAPPING,HANDMore Info ...
- CRIMP TYPE
- DOUBLE
- JAW TYPE
- END
- SPECIAL FEATURES
- STRAP WIDTH IS 5/8 INCH
- STRAP THICKNESS
- 0.015 INCHES MINIMUM AND 0.023 INCHES MAXIMUM
- 3540-00-223-8592 SEALER,STEEL STRAPPING,HANDMore Info ...
- CRIMP TYPE
- SINGLE
- JAW TYPE
- SIDE
- HANDLE OPERATING DIRECTION
- AT RIGHT ANGLES
- STRAP WIDTH
- 1.250 INCHES NOMINAL
- STRAP THICKNESS
- 0.050 INCHES NOMINAL
- 3540-00-223-8589 SEALER,STEEL STRAPPING,HANDMore Info ...
- CRIMP TYPE
- SINGLE
- HANDLE OPERATING DIRECTION
- AT RIGHT ANGLES
- JAW TYPE
- SIDE
- STRAP THICKNESS
- 0.025 INCHES MINIMUM AND 0.035 INCHES MAXIMUM
- STRAP WIDTH
- 0.750 INCHES NOMINAL
- 3540-00-223-8436 STRETCHER,STRAPPING,HANDMore Info ...
- CUTOFF DEVICE
- NOT INCLUDED
- SEAL TYPE ACCOMMODATED
- OPEN
- SPECIAL FEATURES
- FOR APPLYING FLAT STEEL STRAPPING ON BALES, BOXES, BUNDLES, CARTONS, CRATES, PALLETS AND FREIGHT BRACING
- STRAP THICKNESS
- 0.050 INCHES NOMINAL
- STRAP WIDTH
- 2.000 INCHES NOMINAL2.000 INCHES MAXIMUM
- 3655-00-775-9846 CHEMICAL SETMore Info ...
- REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
- CRITICAL CLEANING IS NOT REQUIRED
- 3110-00-738-1704 BEARING,BALL,ANNULARMore Info ...
- MATERIAL
- STEEL BALL
- MATERIAL
- STEEL INNER RING
- MATERIAL
- STEEL OUTER RING
- MATERIAL
- PLASTIC RETAINER
- STYLE DESIGNATOR
- NON-LOADING GROOVE, NON-SEPARABLE
- 4310-00-733-5663 PIN,CROSSHEADMore Info ...
- 5360-00-756-2769 SPRING,HELICAL,COMPRESSIONMore Info ...
- COIL HELIX DIRECTION
- RIGHT-HAND OR LEFT-HAND
- COIL QUANTITY
- 13
- END STYLE
- SPRING END,SQUARED AND GROUND BOTH ENDS
- MATERIAL
- STEEL CORROSION RESISTING OVERALL
- INSIDE DIAMETER
- 0.440 INCHES NOMINAL
