NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 60 results (0.10 seconds)
- 6660-00-049-4177 SHAFTMore Info ...
- 5945-01-276-8874 RELAY,ELECTROMAGNETICMore Info ...
- MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE
- 30.0 AMPERES AC RESISTIVE LOAD
- COIL QUANTITY
- 1
- WINDING QUANTITY
- 1
- OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP
- 115.0 VOLTS AC 25 DEG CELSIUS SINGLE WINDING
- PURPOSE FOR WHICH DESIGNED
- GENERAL
- 5305-01-050-4308 SCREW,SHOULDERMore Info ...
- COUNTERSINK ANGLE
- 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 1.504 INCHES MINIMUM AND 1.534 INCHES MAXIMUM
- HEAD DIAMETER
- 0.338 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- MATERIAL
- STEEL COMP XM-13 OVERALL
- 5331-14-415-4077 O-RINGMore Info ...
- 5331-14-414-7264 O-RINGMore Info ...
- 5331-14-461-7903 O-RINGMore Info ...
- 5305-01-073-0954 SCREW,SHOULDERMore Info ...
- COUNTERSINK ANGLE
- 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 0.881 INCHES MINIMUM AND 0.928 INCHES MAXIMUM
- HEAD DIAMETER
- 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- MATERIAL
- STEEL CORROSION RESISTING OVERALL
- 5305-01-240-8009 SCREW,SHOULDERMore Info ...
- COUNTERSINK ANGLE
- 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
- FASTENER LENGTH
- 1.077 INCHES MINIMUM AND 1.107 INCHES MAXIMUM
- HEAD DIAMETER
- 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- MATERIAL
- STEEL COMP XM-13 OVERALL
- 5305-01-567-8073 SCREW,SHOULDERMore Info ...
- COUNTERSINK ANGLE
- 100.0 DEGREES NOMINAL
- FASTENER LENGTH
- 1.849 INCHES NOMINAL
- HEAD DIAMETER
- 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM
- HEAD STYLE
- FLAT COUNTERSUNK
- MATERIAL
- STEEL COMP XM-13 OVERALL
- 5930-01-202-6621 MICROSWITCHMore Info ...
