NSN Search by National Stock Number
Search the MCRL (Master Cross-Reference List) provided by the FLIS (Federal Logistics Information Service) through the DLA (Defense Logistics Agency) of the DOD (Department of Defense). FLIS provides this data through their WebFLIS and FEDLOG products, but these are not available for public use. This free NSN Search provides NSN lookup of the Military NSN Database by National Stock Number.
The NSN Lookup search engine allows you to easily search for National Stock Numbers (NSN) over all of the catalogs and databases available within NATO for public use:
About 43 results (0.03 seconds)
- 3431-01-464-5934 WELDING MACHINE,INVERTERMore Info ...
- ARC CURRENT TYPE
- AC OR DC
- CURRENT TYPE
- AC
- DESIGN TYPE
- RECTIFIER
- FREQUENCY IN HERTZ
- 60.0
- MAXIMUM CURRENT AT SPECIFIED VOLTAGE
- 250AMPS AT 30VDC
- 3431-01-469-3338 WELDING MACHINE,INVERTERMore Info ...
- ARC CURRENT TYPE
- DC
- CURRENT TYPE
- DC
- DESIGN TYPE
- RECTIFIER
- FREQUENCY IN HERTZ
- 60.0
- MOUNTING TYPE
- BASE
- 3431-01-397-4362 WELDING MACHINE,INVERTER TYPEMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- SINGLE OR THREE PHASE; 208/230/460 VAC WITH AUTO-LINK; 50/60 HERTZ; 300 AMPS AT 32 VOLTS AT 60DUTY CYCLE; 77 POUNDS; P ERFORMS MIG, STICK, TIG, PULSED AND PULSED GTAW WELDING, AND AAC WITH UP TO 3/16 IN. CARBON ELECTRODE; PRESETTABLE, BACKLIT LCD DIGITAL METER; WIDTH 12 IN.; DEPTH 19 1/2 IN.
- 3431-01-469-3275 WELDING MACHINE,INVERTERMore Info ...
- ARC CURRENT TYPE
- DC
- CURRENT TYPE
- AC
- DESIGN TYPE
- RECTIFIER
- FREQUENCY IN HERTZ
- 60.0
- MOUNTING TYPE
- BASE
- 3431-01-388-7661 WELDING MACHINE,INVERTER TYPEMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- 230/460 VAC; 50/60 HERTZ; SINGLE OR THREE PHASE; 210 AMPS AT 28 VOLT AT 60DUTY CYCLE; 300 AMP AT 32 VOLT AT 60DUTY C YCLE; STICK; TIG-SCRATCH; WIDTH 12 IN.; HEIGHT 20 IN.; LENGTH 18.5 IN
- 3431-01-388-7687 WELDING MACHINE,INVERTER TYPEMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- 300 AMPS AT 32 VOLTS AT 60DUTY CYCLE FOR THREE PHASE; 225 AMPS A T 29 VOLTS AT 60DUTY CYCLE FOR SINGLE PHASE; HEIGHT 17 3/8 IN. ;; WIDTH 12 IN.; DEPTH 19 1/2 IN.; WEIGHT 77 POUNDS
- SPECIAL FEATURES
- 50/60 HERTZ SINGLE OR THREE PHASE INPUT POWER; NEMA CLASS 1 RATING; PERFORMS SMAW(STICK), SCRATCH START GTAW (TIG), AND PULSED GTAW WELDING, AND AAC; AUTO LINK AUTOMATIC VOLTAGE LINKING CIRCUITRY; PROCESS SELECTOR SWITCH; ARC CONTROL; REMOTE AMPERAGE CONTROL (14 PIN, PANEL); REMOTE CONTACTOR CONTROL SELECTOR 14 PIN, ON) 14 PIN RECEPTACLE FOR OPTIONAL REMOTE CONTROLS
- 3431-01-464-6219 WELDING MACHINE,INVERTERMore Info ...
- ARC CURRENT TYPE
- AC
- CURRENT TYPE
- AC
- DESIGN TYPE
- RECTIFIER
- FREQUENCY IN HERTZ
- 60.0
- MAXIMUM CURRENT AT SPECIFIED VOLTAGE
- 100AMPS AT 24V
- 3431-01-388-7644 WELDING MACHINE,INVERTER TYPEMore Info ...
- GENERAL CHARACTERISTICS ITEM DESCRIPTION
- U300 AMPS AT 32 VOLTS AT 60DUTY CYCLE; CURRENT RANGE 15-300 AMPS; HEIGHT 18.7 IN.; WIDTH 10.8 IN.; DEPTH 22.2 IN.; WEIGHT 64 POUNDS; OPERATES ON SINGLE PHASE OR THREE PHASE INPUT POWER; MODEL INVERTEC V 300-PRO CV/CC POWER SOURCE
- SPECIAL FEATURES
- THREE POSITION SWITCH FOR CONSTANT CURRENT MODES; DIGITAL METER READS VOLTS OR AMPS; QUICK DISCONNECT STYLE OUTPUT TERMINALS FOR MAXIMUM PORTABILITY; THERMOSTAT PREVENTS OVERHEATING AND EXTENDS WELDER LIFE; LOW NOISE LEVEL WHEN WELDING; BUILTD-IN LINE VOLTAGE COMPENSATION HOLDS THE OUTPUT STEADY TO MAINTAIN WELD CONSISTENCY; INCLUDES 10 FOOTD POWER CORD; STANDARD AUXILIARY POWER FOR A WIRE FEEDER
- 3431-01-469-3085 WELDING MACHINE,INVERTERMore Info ...
- ARC CURRENT TYPE
- AC
- CURRENT TYPE
- AC
- DESIGN TYPE
- RECTIFIER
- FREQUENCY IN HERTZ
- 60.0
- MOUNTING TYPE
- BASE
- 3431-01-438-7593 WELDING MACHINE,INVERTERMore Info ...
- CURRENT TYPE
- AC
- DESIGN TYPE
- GENERATOR
- FREQUENCY IN HERTZ
- 60.0
- POWER SOURCE
- ELECTRIC MOTOR
- PHASE
- SINGLE OR THREE
